LAMFLOOR: Structural Roof Decking & Wide Board Loft Flooring

Northeastern Jack Pine or Spruce Engineered Wood

ARCHITECTURAL GRADE RUSTIC LOOK  

• Wide Board Flooring (Flat side covers 10 1/2" per board)
• V-Groove Ceiling profile ( 2x6 T&G look )
• Beautiful installed directly on joists or rafters
• Easy to finish
• * * NEW : ROUGH SAWN * *

Per popular demand, we are now offering ROUGH SAWN finish roof decking, available on the Wide Plank or V-joint side. Both are ideal to create the reclaimed barn wood look.

STRUCTURAL STRENGTH

1 ¼’’ Thick: No Floor or Roof Sheathing required

                           SPAN

RESIDENTIAL FLOOR SPAN: up to 48”o.c.

COMMERCIAL FLOOR SPAN: up to 32”o.c.

                       ROOF SPAN: up to 72" o.c.

LENGTHS:
All boards identically sized in a unit (48 pces/unit)

• STANDARD: 12' , 16'
• SPECIAL ORDER: any up to 24' (In A/C & C/A grades up to 32', min. volume may apply)

AVAILABLE GRADES:

A/A -LOFT: Both flooring/ceiling faces exposed

A/C -FLOORING: Floor side exposed/V-Groove side hidden

C/A -CEILING: V-Groove side exposed/Flat side hidden

RS -PLANK: Rough Sawn on the wide flat exposed side/ Hidden side C grade with or without V

RS -V side: Rough sawn on the V-Joint side/ Hidden side is flat C grade

*Note: It is important when ordering LAMFLOOR to specify what grade(s) and what quantities of each is needed.

ROUGH SAWN FINISH: Closest solution to the Reclaimed Barn Wood Look

DIFFERENCE between A SIDE vs C SIDE:

• Making an A SIDE includes the following additional steps not needed for a C side:

- strict inspection of each A side after each step of production

- cutting off or removing pieces with bigger cracked knots, bark & wane

- removing the jack pine pieces with natural blue or red colorations so the laminated pieces blend in better within each board

- after planing, putty most holes or knots

- sand each A side of the boards

• Acceptable defects on a C SIDE (planed only,no sanding,no putty):

- Bark,wane, knots or holes that cannot be corrected with on site wood putty & sanding

- Non uniform coloration (blue, red, gray)

- Edge and end joints are more apparent

STABILITY, PERFORMANCE & EASE OF INSTALLATION:

• Kiln Dried uniformly to 6% - 8% before lamination
• Saves time, labor & materials
• Easy & Faster to install than 2 x 6 T&G : Glue it – Fasten it – Each board covers 10 1/2" -Twice more

ADHESIVE USED:

The MOMENTIVE adhesives used in LAMFLOOR do not contain any harmful chemicals that would not be approved for LEED certified project.

Lamfloor® Dimensions

Better coverage than 2 x 6 T&G for same nominal width of 12":

                           Nominal width – exposed width

LAMFLOOR®: =               12"     -      10 ½"        = 1 ½"

 vs

 Two 2x6 T&G:  2 boards  x    ( 6" – 5" = 1")       = 2"

 Covers ½”more /12” by having a joint only every 10½".

Lamfloor Span Chart for Residential* Loft Flooring applications

* When used in industrial, commercial or other applications, please download & refer to the SPAN & DEFLECTION CHARTS that are specific for the loads in the application.